What is the formula for calculating reverb?

Calculate Reverb and Delay Time 60,000 divided by BPM (Beats Per Minute) = delay or reverb time (quarter notes) . You can then use this result, it's fractions, and/or multiples in your reverb and delay times. *note – multiply by 1.5 for dotted values and . 667 for triplets.

How much pre-delay for vocal reverb?

Delay & Reverb Time Calculator Reverb Size Pre-Delay Total Reverb Time Hall (2 Bars) 62.5 ms 4000 ms Large Room (1 Bar) 31.25 ms 2000 ms Small Room (1/2 Note) 15.63 ms 1000 ms Tight Ambience (1/4 Note) 3.91 ms 500 ms

What is the decay time for vocal reverb?

Decay. Decay is the time (in seconds) required for the reflections (reverberation) to die away. In most modern music production, reverb decay times of between one and three seconds are prevalent.

What is the ideal reverb time?

In studio control rooms, a reverberation time of about 0.15 to 0.3 seconds is considered ideal. In recording rooms, the reverberation time rarely exceeds 0.5 seconds. Opera houses and concert halls often have reverberation times of 1.5 to 2 seconds. The Cologne Cathedral has an average reverberation time of 12 seconds!

Can you use too much reverb?

Yes, too much reverb can drown the vocals and make your mix sound amateurish .

What is the best reverb setting for vocals?

Use a mono reverb on vocals if you want them to be upfront and focused. But if you want the vocals to sound large or like they're in the background, use a stereo reverb.

What is the best frequency for reverb?

Either with your reverb's built in filter or your standalone EQ plugin, create a high pass and a low pass filter. Set your high pass filter's cutoff to 600 Hz and the cutoff of your low pass filter to 10 kHz . This should leave you with a nice lush reverb that doesn't take up too much space in your mix.

What happens if you increase the predelay of a reverb?

So if you were to increase the pre-delay to 50ms, then you'll hear the original signal first and then the reverberated signal 50ms later . Predelay is used to route the reverberated signal to the output after the original signal, making the original signal be perceived first.

What is the ideal reverb time for a control room?

For average control room volumes, preferred reverberation times fall into the 0.3 to 0.4 second range. In recording studios the reverberation times are variable, and range between 0.8 and 1.5 seconds, depending on the size of the room.

How much reverb should I use on vocals?

Abbey Road engineers initially thought 600 Hz and 10 kHz was a good starting point, but you can decide for yourself what sounds best for your mix. You'll find that the low end that caused all the muddiness is gone right away. For vocal reverb, you can even come down to around 7 kHz, or even lower if you'd like .

What is the reverb time for a vocal booth?

Professional studio soundproof booths for vocal recordings usually have a reverberation time of around 0,3-0,6s . This is the time needed until the reverberation noticeable goes below the -60dB threshold.

How can I improve my reverberation time?

How can you reduce RT60? Smooth surfaces cause sound waves to bounce around, so include soft, absorptive surfaces in the room . Smaller rooms lead to shorter reverberation times.

How do you properly reverb?

We'll discuss EQing, ducking, timing, and retriggering reverb. Don't let other elements compete with reverb. ... EQing before and after reverb is applied. ... Reverb ducking to provide more clarity. ... Tempo-sync your reverb for better blending. ... Reverb bypass automation for added clarity.

Wavmonopoly Reverb Calculator (2024)

1. Delay & Reverb Time Calculator | Wav Monopoly

Your own personal Pre-Delay and Reverb Calculator, which makes it easy to find out which pre-delay and decay time settings are appropriate for the BPM of your ...
Choosing the right reverb & pre-delay time can make your mix sound lush, crisp, or washed out. Try our easy-to-use Pre Delay Calculator now!

Reverb Size	Pre-Delay	Total Reverb Time
Hall (2 Bars)	62.5 ms	4000 ms
Large Room (1 Bar)	31.25 ms	2000 ms
Small Room (1/2 Note)	15.63 ms	1000 ms
Tight Ambience (1/4 Note)	3.91 ms	500 ms

Wavmonopoly Reverb Calculator (2024)

FAQs